Couldn't find one for sale in the UK at sensible money , nor a case length trimmer for a Lee cutter --- so I made them . Into my shed this morning and made a new mandrel for my Lee cutter , 6.5 stem same length as a .243 fitted a decapping pin in a hole of the correct depth and voila -- dunnit .
Neck sizing die , hmmm , harder jobby . Bingo , i had a spare 6.5 x 55 full length sizer so I softened it and then shortened it by 8mm ,I then bored the die out to 13mm up to the shoulder and reamed it , lapped the edge of the neck so it was nice and smooth with a 0.5mm rad. and stuck it in the ultrasonic bath for 10 mins. Out it came and dried off , straight into the press and tried it out . Magic ! I hhave now got 50 neck sized cases to reload for next weekend at Blackdog ;¬))))
and cost nowt clapclap clapclap
"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
Adolph Hitler – 1933
