Powder for 44 Special and 44 Mag

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Scrumbag
Posts: 92
Joined: Wed Jul 29, 2020 3:45 pm
Home club or Range: BSRC & HPRPC
Contact:
Contact Scrumbag

Re: Powder for 44 Special and 44 Mag

#11 Post by Scrumbag »

bradaz11 wrote:I use vectan a1 in my cowboy 44spl loads, a very nice accurate load. A1 is little flat squares, I get very consistent measuring through my lee drum. I was 4.8gr behind a 200gr bullet. i find it to be very economical given the price per tub too.

where in the world are you? those club abbreviations mean nothing to me
Thanks,

I've never used Vectan, will look into it.

BSRC - British Sporting Rifle Club (Guys with the running deer range at Bisley)

HPRPC - Ham & Petersham Rifle and Pistol Club
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 4 guests