Re: Build Along With Badger: Part 1. The ACTION.
Posted: Sun Aug 26, 2012 1:31 pm
A long action will feed all three, find an action that takes the 80mm nominal length of the 6,5x55 and it could well feed the other two.
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
All people seeking membership must contact admin after registering to be validated.
https://ns1.full-bore.co.uk/
Build Along With Badger: Part 1. The ACTION.
Page 10 of 11
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Sun Aug 26, 2012 1:34 pm
So, if we can ascertain that the INCH or Savage action can feed the 6.5 x 55 Swedish, and can be magazine fed, we've cracked it ! Or is there something else we should think about ?
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Sun Aug 26, 2012 1:41 pm
Yes, just buy a Blaser all three are standard! http://www.blaser.de/fileadmin/editor/c ... ion_EN.pdf :lol:meles meles wrote:So, any definitive answer yet upon if there is an action that can feed 6.5 x 55 SWE, 7.5x55 Swiss 7.61x 51 NATO ?
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Sun Aug 26, 2012 1:46 pm
And well you might run, sandgroper...
If we're on the track of impossible dreams, we'd specify a Krag Jorgensen action....
If we're on the track of impossible dreams, we'd specify a Krag Jorgensen action....
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 8:45 pm
hello every body
I have two barrels with my CG INCH one in 6,5X39 Fred improved (with a 6 br brass ) and an over one in 30X62 (a 308 of 62 mm of long with 280Rem brass ) the cartridge it's very differente and I change the barrel when I want without lost my zero .
For the Savage target ,I made a flexibloc but I love my CG INCH therefore I don't shoot with my Savage .
Fred
I have two barrels with my CG INCH one in 6,5X39 Fred improved (with a 6 br brass ) and an over one in 30X62 (a 308 of 62 mm of long with 280Rem brass ) the cartridge it's very differente and I change the barrel when I want without lost my zero .
For the Savage target ,I made a flexibloc but I love my CG INCH therefore I don't shoot with my Savage .
Fred
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 8:47 pm
Sounds intriguing...
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 9:02 pm
with the 6,5 I have the speed of 6,5X47 (139 grains Lapua at 840 m/s) with 34,3 grains of N540 and the 30X62 I have the speed of 300WM (220 grains sierra at 860 m/s ) with 62,5 grains of N560 .
Fred
Fred
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 9:03 pm
I have seen these cartridges, they are indeed very interesting tongueoutfred wrote:hello every body
I have two barrels with my CG INCH one in 6,5X39 Fred improved (with a 6 br brass ) and an over one in 30X62 (a 308 of 62 mm of long with 280Rem brass ) the cartridge it's very differente and I change the barrel when I want without lost my zero .
For the Savage target ,I made a flexibloc but I love my CG INCH therefore I don't shoot with my Savage .
Fred
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 9:10 pm
Hello David
how are you ?
I'll try to take pictures tomorow .
Fred
how are you ?
I'll try to take pictures tomorow .
Fred
Re: Build Along With Badger: Part 1. The ACTION.
Posted: Fri Sep 14, 2012 9:16 pm
Hey Fred! You need to give me some dimensions for the T Slot of your rifle as well so I can finish a project for you.... :lol: