Page 1 of 1
Indoor Range Bullet Trap UK Supplier
Posted: Thu Apr 27, 2017 11:29 pm
by 24772433
Hi guys,
I'm looking for a UK supplier of the granulated rubber bullet traps for an indoor range. I've come across loads from the US but don't seem to find many from the UK.
Any ideas or recommendations?
Thank you in advance!
Steve.
Re: Indoor Range Bullet Trap UK Supplier
Posted: Fri Apr 28, 2017 5:31 pm
by Racalman
Steve, are you describing a sheet rubber curtain with shredded rubber behind? If yes then I'd be interested too.
My club used this system for some years until it became difficult to find anyone to refurbish it.
We now use a wall of ballistic rubber bricks stacked in front of steel plate. This has its own problems as the bricks are very heavy and, due to the build up of firearms residue, difficult to dispose of economically.
Re: Indoor Range Bullet Trap UK Supplier
Posted: Fri Apr 28, 2017 5:54 pm
by bradaz11
try giving Rich at the tunnels a ring, 01297 560049
they use this type of backstop in the 100 yrd range.
the 25 and 35 yrd ranges all use rubber curtain (linatex) in front of steel plates.
failing that, what about chipped rubber for playgrounds or shredded car tyres etc?
Re: Indoor Range Bullet Trap UK Supplier
Posted: Fri Apr 28, 2017 8:20 pm
by Racalman
That's useful info, thanks.
Can you clarify - what sort of backstop do they use at 100 yards - ballistic block or linatex?
Re: Indoor Range Bullet Trap UK Supplier
Posted: Sat Apr 29, 2017 1:30 am
by bradaz11
If you mean at the tunnel? Neither. Rubber chippings piled deep. Don't know what's under it all
Re: Indoor Range Bullet Trap UK Supplier
Posted: Sat Apr 29, 2017 10:18 am
by Fedaykin
Meggitt Ltd do this, I spoke to their UK rep at last years IWA show as a friend was replacing the bullet traps at their indoor range.
Meggitt Training Systems Ltd.
The Boulevard
Orbital Park
Ashford
Kent TN240GA
Phone: +44(0) 1233505707
Mobile: +44 (0) 7944 083272
Fax: +44(0) 1233503707
https://www.meggitttrainingsystems.com/ ... llet-traps
Re: Indoor Range Bullet Trap UK Supplier
Posted: Sun Apr 30, 2017 9:04 pm
by Racalman
OK thanks everyone, that's very helpful.