Page 1 of 2
Where to get these from?
Posted: Wed Apr 11, 2012 5:58 pm
by M99
Tried all the usual sources locally, trying to find some of these in I believe 3.0mm
I believe they are c-clips? (ready to be corrected though!)
Mike
Re: Where to get these from?
Posted: Wed Apr 11, 2012 6:08 pm
by ovenpaa
E-clips, eBlag do them in sets or individual sizes.
Re: Where to get these from?
Posted: Wed Apr 11, 2012 6:41 pm
by M99
Thanks - I'd seen them on E-blag called all sorts of things!
Was looking for a local source/outlet - tried all my local hardware/motor factor type places
Mike
Re: Where to get these from?
Posted: Wed Apr 11, 2012 6:57 pm
by MartinC
Hi,
Your local model shop will sell them, they are used on all kinds of parts for model helicopters and cars.
How many are you after? I probably have a few here if that is any good to you. Send me your address and I will send you them FOC
Cheers
Martin
Re: Where to get these from?
Posted: Wed Apr 11, 2012 7:00 pm
by M99
MartinC wrote:Hi,
Your local model shop will sell them, they are used on all kinds of parts for model helicopters and cars.
How many are you after? I probably have a few here if that is any good to you. Send me your address and I will send you them FOC
Cheers
Martin
Martin,
Very kind offer - but I have just sourced some locally. Thanks again for the offer though.
Mike
Re: Where to get these from?
Posted: Wed Apr 11, 2012 7:08 pm
by MartinC
Not a problem, glad you got sorted
Re: Where to get these from?
Posted: Fri Apr 13, 2012 6:14 am
by Griff
This looks like just the thing I need. I only need 1 but a spare or 2 would be useful for my Barnard trigger retaining pin.
I made the mistake of wanting to move my trigger shoe forwards, took the clip off and then proceeded to nearly lose the internal spring and ball bearing in the grass of stickledown. Found them but didn't put the clip on fully and it came off at some point.
If anyone knows the size I need and might have a spare or 2 I'd be very grateful!.
G
Re: Where to get these from?
Posted: Fri Apr 13, 2012 8:39 am
by Meaty
E-clips
I have a few different sizes of these in stock but they are mostly in larger sizes. If you get stuck for any, pm me with the shaft diameter and the groove diameter/quantity required and I will order some in-they usually come in bags of 50 or 100 but are only pennies so I can distribute them to the needy.
Re: Where to get these from?
Posted: Fri Apr 13, 2012 9:17 am
by ovenpaa
Meaty wrote:they usually come in bags of 50 or 100 but are only pennies so I can distribute them to the needy.
That did make me smile
Re: Where to get these from?
Posted: Fri Apr 13, 2012 2:05 pm
by Meaty
Oooh! Just read my last post again-does sound a bit pious doesn't it
Maybe what I should have put is....If you want any, give me a
*** call. :lol:
