Page 1 of 1
Third eye tactical scope rings help please
Posted: Thu Apr 12, 2012 6:21 pm
by toffe wrapper
Hi All
Does any one know the torque settings for third eye rings
Many thanks
TW
Re: Third eye tactical scope rings help please
Posted: Fri Apr 13, 2012 6:37 am
by sanselm
Hi TW,
I was at Craig's yesterday and the subject actually came up and the answer from the horses mouth is 1.5 Nm - 2 Nm max.
Regards
Stuart
Re: Third eye tactical scope rings help please
Posted: Fri Apr 13, 2012 6:42 pm
by toffe wrapper
Sanselm
Thank you for the info
TW
Re: Third eye tactical scope rings help please
Posted: Tue Apr 17, 2012 8:04 pm
by Ronin
Not sure what this equates to, but I usually tighten the rings to 15 inch lbs and the clamp (to picatinny) to 35 inch lbs
Re: Third eye tactical scope rings help please
Posted: Tue Apr 17, 2012 10:07 pm
by phaedra1106
Handy chart for conversions
http://www.thetoolhut.com/Torque-Conver ... ounds.html
And a handy calculator for Newtons, inch and foot pounds in both directions
http://www.boltscience.com/pages/convert.htm
Re: Third eye tactical scope rings help please
Posted: Wed Apr 18, 2012 7:40 pm
by toffe wrapper
info was spot on for me my torque driver is in NM. Engers at work did me a laminated spread sheet to convert to NM to inlbf from 0.1 > 6 NM
The scope cross bolt took the full 6 NM to tighten onto rail
TW