AIA 7.62x39 Enfield

Anything Fullbore rifle related, Hunting, Target, Match.

Moderator: dromia

Message
Author
User avatar
Alpha1
Posts: 8633
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: AIA 7.62x39 Enfield

#21 Post by Alpha1 »

We have a Walther red dot (actually a red cross) on our now. It's a superb combination, ideal for fast target acquisition and more than accurate enough for sett defence. We can get off 10 shots in just over 20 seconds in the standing unsupported position and the group size is about 4 inches at 25 mards
I am using cast loads in mine they are accurate enough but they don't feed through the magazine very well don't think they are pointy enough. I shoot it using soup can boolits off the bench supported and single load. I can not remember the last time I fired jacketed ammo in it must be a while. I like to take my time now a days it certainly shoots tighter groups than 4 inches at 25 yards a lot tighter. I would like a better scope for it. Its a fun gun. bangbang
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: AIA 7.62x39 Enfield

#22 Post by meles meles »

Oh indeedy, they can be very accurate when supported, but we are happy with a 4 inch group from the standing unsupported position...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
User avatar
Alpha1
Posts: 8633
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: AIA 7.62x39 Enfield

#23 Post by Alpha1 »

What type of ammo are you using mines a bit finicky feeding wise I don't think I could shoot ten rounds through it rapid fire with the original magazine. I bought a five round mag and it works much better than the original In fact I don't use the original one any more now I come to think of it. I will have to give it a outing with jacketed and see how it performs. Have to be outside though I will get into bother if I start shooting jacketed rounds on the 25 yard indoor range. Me thinks Adam would have some thing to say about that.
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: AIA 7.62x39 Enfield

#24 Post by meles meles »

Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Demonic69

Re: AIA 7.62x39 Enfield

#25 Post by Demonic69 »

I would love one of these (the 16" Fluted variant)! I thought they'd have been available for around £300 (based on a bit 'O the Google) but nobody seems to be selling. Are they just not very prolific or does nobody want to sell because they're actually better than their reputation?
User avatar
Alpha1
Posts: 8633
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: AIA 7.62x39 Enfield

#26 Post by Alpha1 »

I don't think there are many of them about. I don't think they don't make them any more.
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: AIA 7.62x39 Enfield

#27 Post by meles meles »

They are quite rare, and people are beginning to realise their initial reputation was ill deserved. We're told it stemmed from the fact that they were exported from the Antipodes with their king screw not fully tightened so they wouldn't swell and split on their passage through the Tropics. However, on arrival in temperate climes, nobody bothered to check the screw and bedding...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Paul101
Posts: 69
Joined: Sat May 11, 2013 5:47 am
Home club or Range: Kings Lynn & St. Michael's R&P club + The Grove
Location: Kings Lynn, Norfolk
Contact:

Re: AIA 7.62x39 Enfield

#28 Post by Paul101 »

Just put a deposit on an AIA 7.62x39 M10A , one previous owner who's in his 70's.
his sons bought it for him about 5 years ago, only fired about 50 times.
So my FAC is away for a variation, then its mine, all mine.

Have been looking into sub-loading with lead gas checked boolits for the clubs 50mtr outdoor range.
Demonic69

Re: AIA 7.62x39 Enfield

#29 Post by Demonic69 »

Where did you find it Paul?
User avatar
dromia
Site Admin
Posts: 20241
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: AIA 7.62x39 Enfield

#30 Post by dromia »

I've had a few M10s and M10As through my hands over the years, some of them are excellent shooters and some aren't they seem to be a pig in a poke.

I've always fancied an M10A but would only buy one that I had seen shoot.

Evidently they tried to flog them to the Canadians who had this to say about they and could explain their varied ability to shoot. Extract courtesy of Steve Redgwell's site.

Excerpt from a Canadian government document concerning the military's Small Arms Replacement Project II (SARP 2):

13. A company based in Australia, Australian International Arms (AIA), markets a M10 No.4 Mk IV Modern Short Magazine Lee Enfield (SMLE) Rifle in 7.62mm NATO calibre. This rifle is a replica of the Lee Enfield but in appearance only. The cost of this rifle, less ancillaries is approximately $800.00 (Cdn). The CF technical authority for small arms, DSSPM 5, on 24 Jul 08 conducted an initial examination of the AIA rifle because in appearance it closely resembles the current Lee Enfield. The technical authority concluded that the rifle would not meet the Canadian Ranger’s requirement without significant modification and re-engineering because it is cheaply made.

14. The Australian International Arms M10 No 4 Mk IV SMLE Rifle fires a 7.62 x 51mm NATO cartridge and at first glance appears to meet the CF requirement as a replacement for the Canadian Ranger Rifle. The rifle is assembled from parts manufactured from throughout South-East Asia in locations such as as Viet Nam, Thailand (teak stocks) and Indonesia. The barrel is hammer-forged in Australia. The general assessment is that the rifle is accurate and attractively priced, but it was clearly designed for the civilian recreational shooting market and it is not a military product. Many parts of the rifle are cheaply made and would likely fail under testing.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests