Casting Silver Bullets
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Casting Silver Bullets
Dromia, ideally something to suit a .357/.38
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Casting Silver Bullets
We suppose these sparkly boolits will be quenched into Holy Water after casting ?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
-
saddler
Re: Casting Silver Bullets
358429 is the Keith designovenpaa wrote:Dromia, ideally something to suit a .357/.38
or
358477 is a generic SWC
-
dromia
- Site Admin
- Posts: 20245
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Casting Silver Bullets
This is the real Keith design bullet, but unfortunately for ovenpaa this one is in aluminium.
http://noebulletmolds.com/smf/index.php ... cseen.html
http://noebulletmolds.com/smf/index.php ... cseen.html
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
redcat
- Full-Bore UK Supporter
- Posts: 1448
- Joined: Fri Jan 16, 2015 11:42 am
- Home club or Range: Teesdale P&R Club.
- Contact:
Re: Casting Silver Bullets
David, I think I have a .38 Lyman mould I don't need (no handles). Haven't I seen that you have some Berdan cases? Maybe we could come to an arrangement.
Redcat
Redcat
If you think you are a person of some importance, try ordering someone else's dog around.
Re: Casting Silver Bullets
Redcat that sounds like a plan. Please PM me your contact details.
Who is online
Users browsing this forum: No registered users and 4 guests