Accuracy International AX keyhole slot dimensions

[ovenpaa]

Can someone please point me in the direction of any articles or drawings detailing the dimensions of the AI keyholes slots please, I have been searching for the last hour to no avail...

[Pinguino]

I guess your looking for super accurate measurements Ovenpaa? If not, I can measure mine as best as I can if you want.

[ovenpaa]

I only have some rough measurements scaled off an image so anything would be better than what I have right now :)

It is the bottom part where a bipod would go that I am interested in please.

[Pinguino]

Oh no thats way out! You need to find dimentions closer to below. I can't measure too accurately as I don't have calipers or micrometer, sorry!

Centre to centre over 7 keyholes is 120mm not 161mm
Centre to Centre between two is 20mm not 27.5
spacing between keyslots is 3mm not 4.5mm
Slim width is 5mm not 7.4
hole diameter is 10mm
1 keyslot is 16mm not 23mm

These measurements are off my AI AX308
























........................................................................................................................................................................................

[ovenpaa]

Hehe, I had a feeling it was way out. Are all the key slots identically sized, also could you measure the thickness of the forend if possible?

[Pinguino]

Yep all keyholes the same size. Forend approx 3mm thick

[ovenpaa]

Many thanks