Decent quality imperial drill bits.

[Sim G]

Got a new trigger of one of the guys here for my Remy 700. Need a 0.125 or 1/8th inch drill bit to clean the "stake" from the fixing holes. Now that 1/8" bit equates to 3.175mm. The pin is precision ground for a slip fit in a 1/8" hole. I have 3mm bits and believe it or not, some 3.2mm drill bits, but nothing that is spot on.

None of my local places even stock imperial bits! FFS! They wonder why Brexit was voted for..... Damn that Frenchie measurement!

[dodgyrog]

Drill undersize then ream it to get the best fit

[Meaty]

I have got a brand new Swiss Tech TiN tipped one here that you can have. Pm me your address and I will slip it in the post if you dont mind waiting a couple of days.
Either that or contact your local engineering suppliers (Cromwell tools etc) as they should have loads.

[ovenpaa]

3,2mm is the tap size for M4

[1066]

Drill undersize then ream it to get the best fit

Yes, drill 3mm and ream.

[fra150l]

http://www.tracytools.com/hs-drill-sets

They sell individual drills.

[Sim G]

All sorted with the wonderful generosity of Meaty!

[saddler]

More like drill 2.5mm & hang on!
You've never seen a limp wristed Hexhamite let loose with a power tool before....

[Sim G]

Shut up Monkey Boy!

[Dellboy]

Snap on do imperial stuff ....
There drill bits are good ..