Reworking a enfield.303 to pistol calibre

Anything Fullbore rifle related, Hunting, Target, Match.

Moderator: dromia

Message
Author
User avatar
dromia
Site Admin
Posts: 20240
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Reworking a enfield.303 to pistol calibre

#11 Post by dromia »

It always puzzles me what is meant by "download" in this context?

"Download" from what?
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Chapuis
Posts: 1676
Joined: Tue Dec 28, 2010 11:32 am
Contact:

Re: Reworking a enfield.303 to pistol calibre

#12 Post by Chapuis »

Furiouspilgrim wrote:I’ve seen some ranges that won’t allow downloads, but wouldn’t give a good reason. It was down to the ‘older’ committee members basically just deciding they didn’t want it so no one else was going to have it.
The old rules for gallery rifle competitions actually stated that only recognised pistol calibres could be used in the centrefire events, and that downloaded rifle cartridges were not allowed. Presumably this was to avoid any accidental mix ups with ammo. I think that the rules have since been changed but I haven't looked at a current rule book.
User avatar
bradaz11
Full-Bore UK Supporter
Posts: 4791
Joined: Mon Jun 02, 2014 1:23 am
Home club or Range: The tunnel at Charmouth, BWSS
Location: Bristol
Contact:

Re: Reworking a enfield.303 to pistol calibre

#13 Post by bradaz11 »

hitchphil wrote:
kennyc wrote:
Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
Why should / could it have a prohibition? if a rifle is under the MV & Energy why prohibit it because of its 'description'?
One of my current ranges has asked me not to shoot fullbore rifles in the 25m range. My loaded rounds will not be an issue as they will be within the mv but they are worried that someone may see me shooting my guns and shoot their factory loaded 303 etc. This could pass straight through the backstop and kill anyone in the armoury behind. I don't mind not doing it for that reason
When guns are outlawed, only Outlaws will have guns
User avatar
dromia
Site Admin
Posts: 20240
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Reworking a enfield.303 to pistol calibre

#14 Post by dromia »

Surely it is incumbent 'pon all range users to be aware of a range's certificate limits and use ammunition that complies with those limits.

I f a club suspects that it has members who do not fulfil that responsibility then it is they who should be brought up not responsible users penalised for their failure.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Dark Skies
Posts: 2860
Joined: Tue Apr 22, 2014 11:02 am
Home club or Range: NRA
Contact:

Re: Reworking a enfield.303 to pistol calibre

#15 Post by Dark Skies »

Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
Not necessarily - I explored this when I wanted to purchase an M1 to use on our range using lead bullets. Apparently our range is only approved for rifles using a pistol calibre. I'm sure there are plenty of ranges in the same boat that can't readily be hardened to suit the inspector.
"I don't like my job and I don't think I'm gonna go anymore."
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:

Re: Reworking a enfield.303 to pistol calibre

#16 Post by kennyc »

hitchphil wrote:
kennyc wrote:
Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
Why should / could it have a prohibition? if a rifle is under the MV & Energy why prohibit it because of its 'description'?
their game their rules
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:

Re: Reworking a enfield.303 to pistol calibre

#17 Post by kennyc »

dromia wrote:It always puzzles me what is meant by "download" in this context?

"Download" from what?
it always puzzles me when people can't work out context from a discussion :p
User avatar
dromia
Site Admin
Posts: 20240
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Reworking a enfield.303 to pistol calibre

#18 Post by dromia »

So tell me in this context what is it downloaded from?
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:

Re: Reworking a enfield.303 to pistol calibre

#19 Post by kennyc »

dromia wrote:So tell me in this context what is it downloaded from?
sigh, if you shoot cast bullets from a rifle that would usually fire FMJ's then it would be normal to consider the cast load "downloaded" as it generally produces less velocity and energy, and in the context of this thread, that is the aim, there are of course people who, for their own reasons shoot cast bullets at close to (possibly over?)FMJ velocities.
I have had this discussion with several ranges over the last year and all of them are not happy to have non pistol calibres fired in their ranges, I am not trying to justify their ruling I just put it forward as a possible reason for the OP wishing to convert an Enfield to a pistol calibre.
User avatar
dromia
Site Admin
Posts: 20240
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Reworking a enfield.303 to pistol calibre

#20 Post by dromia »

For some thing to be "downloaded" it must be less than established amount of MV/ME.

Unless there is clarity as to what that benchmark is then the expression is surely meaningless in this context.

For example if we take CIP values for a calibre as the benchmark then is any factory round that comes under those values considered as "downloaded" ammunition?

If so then it would still no doubt be over the top for most 25yrd indoor range certificates even although it is "downloaded".
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests