Reworking a enfield.303 to pistol calibre

Anything Fullbore rifle related, Hunting, Target, Match.

Moderator: dromia

Message
Author
honda chris
Posts: 27
Joined: Mon Dec 15, 2014 10:37 pm
Home club or Range: chalfont
Contact:

Reworking a enfield.303 to pistol calibre

#1 Post by honda chris »

Hi all I'm after some advice.
I would like to have a full length bolt throw Enfield in a pistol calibre for indoor range use.
Firstly I need to acquire 2 shot out examples.
Any calibres to stay clear of?
.45 ACP it's tried and tested and barrels are available.so I was thinking
And possibly 9mm

Thanks Chris
honda chris
Posts: 27
Joined: Mon Dec 15, 2014 10:37 pm
Home club or Range: chalfont
Contact:

Re: Reworking a enfield.303 to pistol calibre

#2 Post by honda chris »

I would consider other rifles to use as the base and action.
I have a k98 in 7.62 that could be offered up
User avatar
Alpha1
Posts: 8633
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Reworking a enfield.303 to pistol calibre

#3 Post by Alpha1 »

Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
User avatar
AL8
Posts: 681
Joined: Fri Sep 02, 2011 8:27 am
Location: Essex
Contact:

Re: Reworking a enfield.303 to pistol calibre

#4 Post by AL8 »

I shoot both a swiss K31 and a model 1889 with cast loads and Unique. Works well
User avatar
dodgyrog
Posts: 4103
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: Reworking a enfield.303 to pistol calibre

#5 Post by dodgyrog »

Armalon has done what you want already
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
User avatar
kennyc
Posts: 2340
Joined: Wed Jul 20, 2011 11:21 pm
Home club or Range: hunters NRPC
Location: Reading West Berks
Contact:

Re: Reworking a enfield.303 to pistol calibre

#6 Post by kennyc »

Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
hitchphil
Posts: 911
Joined: Thu Jul 05, 2012 11:56 pm
Home club or Range: Bisley - Mostly
Contact:

Re: Reworking a enfield.303 to pistol calibre

#7 Post by hitchphil »

kennyc wrote:
Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
Why should / could it have a prohibition? if a rifle is under the MV & Energy why prohibit it because of its 'description'?
Quality control of Scottish Ethanol. & RDX/HMX

& my fav chemical is :-) 1,3,7-trimethylxanthine.......... used to kill frogs.... but widely consumed & in vast quantities by the French? Eh?
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: Reworking a enfield.303 to pistol calibre

#8 Post by ovenpaa »

Different ranges, different rules.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Chapuis
Posts: 1676
Joined: Tue Dec 28, 2010 11:32 am
Contact:

Re: Reworking a enfield.303 to pistol calibre

#9 Post by Chapuis »

Reloading for pistol calibres is usually slightly quicker and easier than for rifle cartridges especially if using a progressive press. Perhaps that's the reason?
Furiouspilgrim

Re: Reworking a enfield.303 to pistol calibre

#10 Post by Furiouspilgrim »

I’ve seen some ranges that won’t allow downloads, but wouldn’t give a good reason. It was down to the ‘older’ committee members basically just deciding they didn’t want it so no one else was going to have it.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests