Page 1 of 5
Reworking a enfield.303 to pistol calibre
Posted: Sun Feb 25, 2018 11:32 pm
by honda chris
Hi all I'm after some advice.
I would like to have a full length bolt throw Enfield in a pistol calibre for indoor range use.
Firstly I need to acquire 2 shot out examples.
Any calibres to stay clear of?
.45 ACP it's tried and tested and barrels are available.so I was thinking
And possibly 9mm
Thanks Chris
Re: Reworking a enfield.303 to pistol calibre
Posted: Sun Feb 25, 2018 11:33 pm
by honda chris
I would consider other rifles to use as the base and action.
I have a k98 in 7.62 that could be offered up
Re: Reworking a enfield.303 to pistol calibre
Posted: Sun Feb 25, 2018 11:50 pm
by Alpha1
Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 5:38 am
by AL8
I shoot both a swiss K31 and a model 1889 with cast loads and Unique. Works well
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 7:36 am
by dodgyrog
Armalon has done what you want already
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 7:54 am
by kennyc
Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 8:31 am
by hitchphil
kennyc wrote:Alpha1 wrote:Why whats the point you can shoot any military caliber rifle indoors on a 25 yard range using cast bullets and fast pistol powders. I shoot a .303, a 7.62x39, etc without any issues or alteration to the guns.
perhaps his range, as mine, has a prohibition on downloaded full bore rifles ?
Why should / could it have a prohibition? if a rifle is under the MV & Energy why prohibit it because of its 'description'?
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 8:33 am
by ovenpaa
Different ranges, different rules.
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 8:48 am
by Chapuis
Reloading for pistol calibres is usually slightly quicker and easier than for rifle cartridges especially if using a progressive press. Perhaps that's the reason?
Re: Reworking a enfield.303 to pistol calibre
Posted: Mon Feb 26, 2018 9:52 am
by Furiouspilgrim
I’ve seen some ranges that won’t allow downloads, but wouldn’t give a good reason. It was down to the ‘older’ committee members basically just deciding they didn’t want it so no one else was going to have it.